10 Ways to Accelerate WiFi Connection

Blog Share- 10 Ways to Accelerate WiFi Connection. Poor WiFi wireless connections can make people feel depressed. Especially when the internet has become part of everyday life, ranging from entertainment to about the job.

However you may not need to panic when a WiFi connection at home suddenly blocked. The first step you should do is to check the router that you use. Because, starting from this position until the router settings will affect the WiFi signal is strong or not.

When checking your router, make sure you try these 10 simple steps, as reported KompasTekno of Vox, Friday (01/09/2015).

1. Check the position of the router

Checking the router positions seem trivial, but the effect could be huge. Routers work sends a signal to all directions. Therefore, you should put the router in the center of the room.

When the router is placed next to the window, then no signal is sent to the outside. This will make the WiFi futile and does not reach all parts of the room.

2. Do not put on the floor

Place the router in a high place, such as a table or dresser. Higher position will benefit because the router is designed to send a signal down. In addition, the floor material containing cement, concrete and metal that is impenetrable by WiFi signal.

3. Place the router in a special place

WiFi signal would be reflected more strongly in the room where you keep the router. On that basis, we recommend that you put the router is in a room that often you occupy when using the internet.

4. Select the open

There are many materials that can absorb the signal router and reduce performance. To maintain optimum signal performance, you should not put the router in between the large-sized furniture and walls, or in the closet. Choose the crush-free position and make the router can be seen from anywhere.

5. Keep away from other electronic

Keep your router from other electronic devices, such as microwaves, cordless phones, and TVs. Any device that generates an electromagnetic signal could disrupt and weaken the performance of the WiFi signal.

6. Adjust the antenna to stand

Set the router's antenna is in a vertical position. This position will make the signal emitted horizontally so that the WiFi signal more easily reach all parts of the room.

7. Check the power snyal

There are a number of applications, such as Cloudcheck or Amped which can be used for this purpose. When the check signal, you can map out which part receives strong signals and which are receiving a weak signal.

8. Set the router software

You can also speed up the WiFi connection by entering certain settings in the software router. Access to this software can be opened through a special IP. You can check it on the bottom of the router or the instructions supplied in the crib.

Upon entry into the settings menu, change the router's channel frequency. Usually there are 14 channels to choose from. The best channel usually is 1, 6, and 11. Channel is likely minimal disruption because rarely intersect with the channel used by others.

In addition to setting the channel, check for firmware updates. Usually the router maker will issue a firmware update to improve the performance of the device.

9. Perform speed test

Do a speed test to find out where your connection problem. First try to do it with a WiFi connection, and then do the same thing using a cable connection. If both are equally bad, the problem is on your internet service provider.

10. Buy a new router

It is a last resort. When all have been tried and you've made sure the problem does not come from an internet service provider, buy a new router.